Concrete can be damaged by salt, especially if it is brand-new. In the winter, it is more likely to deteriorate and be damaged by de-icing solutions such sodium chloride road salt and below-freezing temperatures. Concrete is more prone to cracking as a result of the freeze-thaw cycle being worsened by de-icing salts. Additionally, cracked concrete means you’ll have to pay extra money to fix or replace it the following spring. Utilizing concrete-friendly ice melt even before the temperatures drop is the most important step you can take to save your concrete from winter harm. From mixing to setting up to sealing and drying, investing in high-quality concrete slab installation contractors is rewarding.

Some Advice To Protect Your Concrete From Winter Rock Salt Damage:

1. Concrete with a minimum compressive strength is advised; the more solid the concrete, the better its resistance to the force of expanding water.

2. Water can enter the tiny entrained air spaces in air-entrained concrete as it freezes and expands, which relieves pressure on the pores and capillaries of the concrete.

3. Don’t add water to the concrete mixture on the job site. Hire experienced concrete mixers and pourers to complete the task.

4. Keep any drainage covers free of debris around concrete so that rain and melting snow can properly drain and not collect and sit on concrete surfaces all winter.

5. It is not a good idea to plow snow on concrete with a metal blade. Instead, clear the snow with a blade that has a rubber or vinyl edge. Use a plastic shovel to clear snow from concrete rather than a metal one. Use a snowblower with plastic or vinyl soles to shield a concrete driveway from snow blowing.

6. After parking your car, clear any extra snow that has accumulated on the wheels or fallen snow from the wheel wells to prevent any de-icing salts from collecting on your driveway.

7. To prevent your concrete from freezing in the winter, use concrete-friendly ice melt instead of de-icing salts.

Sealing Concrete Before Winter

Before winter sets in, coat your concrete with a concrete sealant to guard against winter damage. Keep an eye out for a day when the concrete is dry and free of snow and ice if winter has already started and you haven’t sealed it yet. That way, you can seal it before the worst of the winter hits.

A concrete sealer can stop concrete from absorbing water throughout the winter, protecting it from the detrimental effects of the freeze-thaw cycle and de-icing salts.

Deal with damage in the spring.

Depending on how bad the damage is, there are many options to fix your concrete in the spring. If there is only surface damage, such as spalling on the surface, the loose, flaky material can be removed. Then you can include an overlay.

Decorative concrete can be seen through an overlay by employing a small cross-section. Additionally, broken stamped concrete can be repaired using stamped overlays.


Look for compressive strength and air entrainment properties to withstand the pressure of icy water and sodium chloride road salt.

This condition has become all too common for many homes after a particularly difficult winter with extreme temperatures, copious amounts of snow, and ice storms. Using a water-repellent concrete sealer and staying away from de-icing salts can give you piece of mind.